PSG1000 | POWERSHIEL
Security policy
Delivery policy
Return policy
| Capacity | 1000VA / 600W |
|---|---|
| Topology | Line Interactive |
| Voltage | 240VAC (Nominal) |
| Voltage Range | 177 to 290VAC |
| Frequency Range | 50Hz or 60Hz (Auto sensing) |
| Output Voltage | 240VAC ± 10% |
| Frequency Range (Batt Mode) | 50Hz or 60Hz ±1Hz |
| Transfer Time | 6ms (Typical) |
| Australian Outlets – UPS & Surge Protection | 4 |
| Australian Outlets – Surge Protection | 4 |
| Capacity | 12V*9Ah |
| Backup Time | 25 min (1 PC load at 100W) |
| Typical Recharge Time | 6–8 hours recover to 90% capacity |
| Full Protection | Overcharge, discharge, short circuit and thermal protection |
| Surge Protection | 475Joules /13000Amps – Best in its class |
| Data Protection | N/A |
| Interface | USB interface |
| Software | PowerShield® NetGuard® supports Windows, Linux, Unix & Mac |
| Visual Alarm | LED, AC Mode, Battery Mode, Low Battery (Batt.Mode), Fault, Overload, Remaining Time |
| Audible Alarm | Battery Mode, Low Battery (Batt. Mode), Fault, overload |
| Dimension D x W x H (mm) | 345 x 200 x 100 |
| Net Weight (kgs) | 6.6 |
| Temperature | 0–40°C |
| Humidity | 0–90% RH (non-condensing) |
| Noise Level | <40dB (no fan) |
| Safety/EMC | EN62040 - 1 - 2008, IEC60950 - 1: 2001, EN62040 - 2 2006 |
| Warranty | 2 Years |
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
check_circle
check_circle